Matek Systems F411-WTE F4 Flight Controller for RC FPV Plane, Airplane, VTOL Fixed-wing DIY Accessories

The Matek F411-WTE Flight Controller is a powerful and versatile control board powered by an STM32F411CEU6 microcontroller running at 100MHz. It is designed to provide advanced flight control capabilities for various multi-rotor and fixed-wing unmanned aerial vehicles (UAVs).

Key Specifications: - MCU: STM32F411CEU6 at 100MHz - Barometer: SPL06-001 (I2C) - OSD: AT7456E (SPI) - Blackbox: No - 2x UARTs, 2x Full Softserial - 6x PWM outputs (2x Motors, 4x Servos) - 1x I2C - 4x ADC (VBAT, Current, RSSI, AirSpeed) - 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator (Red) - Built-in inverter on UART2-RX for SBUS input - Switchable Dual Camera Inputs - Vbat power ON/OFF switchable for VTX and camera - PPM receiver: Not supported

Power Supply: - 6~30V DC IN (2~6S LiPo) - 132A Current Sense (Scale 250) - PDB/Current sense resistor: 90A continuous, 132A burst - BEC 5V 1.5A for FC & Peripherals - BEC Vx 5A for servos, 5V/6V option - Vbat for VTX and camera (ON/OFF switchable) - LDO 3.3V 200mA - Battery Voltage Sensor: 1k:10k

Firmware: - INAV Target: MATEKF411TE (ICM42688P version is supported by INAV 6.0 or newer)

Physical: - Dimensions: 31 x 26 x 16.5 mm - Mounting: 22 x 22mm, Φ2mm - Weight: 10g (including Dupont 2.54 pins)

Tips: - The F411-WTE is shipped with INAV fw 4.1.0 pre-loaded for quick start. - Start with INAV 5.0, and the MatekF411TE target will be listed in the INAV configurator. - Download INAV firmware 4.x.x from the website (click "Firmwares" button at the upper right corner). - You may also download INAV 5.x or newer version directly from the INAV configurator.

product information: