Simplified title: SoloGood HOBBYEAGLE A3 Pro V2 6-Axis RC Plane Flight Stabilizer

The new A3 Pro V2 is a high-performance and functional 6-axis gyro and stabilizer designed for R/C airplanes. Featuring a 32-bit MCU, high-precision 6-axis MEMS sensor, improved hardware platform, and new firmware solution, it provides more reliable performance. This gyro supports six flight modes, including GYRO OFF, NORMAL, LOCK, ANGLE, LEVEL, and HOVER, as well as three wing types: standard fixed-wing, delta-wing (flying-wing), and v-tail.

With the advantage of multi-protocol serial receivers support, the A3 Pro V2 allows you to simplify the connection of the receiver. It is compatible with most standard PWM receivers, PPM, and multi-protocol digital serial receivers. Additionally, the firmware is upgradable, requiring an optional data cable.

The gyro's features include: - Compatible with most standard PWM receivers, PPM and multi-protocol digital serial receivers - 32-bit MCU, high-precision 6-axis MEMS sensor, improved hardware platform and new firmware solution provide more reliable performance - 6 flight modes, including GYRO OFF mode, NORMAL mode, LOCK mode, ANGLE mode, LEVEL mode and HOVER mode - 3 wing types: standard fixed-wing, delta-wing(flying-wing), v-tail - Separated basic gain adjustment for Aileron, Elevator and Rudder - Remote master gain supported - Firmware upgradable (an optional data cable is required)

The A3 Pro V2 supports PPM and multi-protocol digital serial receivers, allowing you to connect the gyro to the receiver with a single wire. When using a specific type of these receivers, the appropriate type of receiver channel allocation will be preset in the A3 Pro V2. However, if you use a standard PWM receiver with a standard wiring layout, the channel mapping does not apply.

When the A3 Pro V2 is operating in single-line receiver mode, the [THR Out/AIL] can be used as the throttle output channel for the ESC or the throttle servo if a mini receiver is being used which has no additional output connectors.

Please note that the remote master gain channel is disabled in single-line mode by default. To activate this feature, you can assign a channel number for the gain channel in the Receiver Menu.

If you are going to use a Spektrum DSM2/X satellite for the A3 Pro V2, a DSM Adapter [HEDSMADP] is required to make the connection between the satellite and the gyro.

The A3 Pro V2 has two main menus: the Setup Menu and the Receiver Menu. The Setup Menu contains 10 setting functions that normally only need to be set up once after installation, while the Receiver Menu allows you to change the receiver type and program the channel mapping for single-line receivers.

Specification: - Main Controller: 32-bit MCU - Sensor: High-precision MEMS 6-axis sensor - Gyroscope Scale Range: ±2000 dps - Accelerometer Scale Range: ±4g - PWM Output: 920uS to 2120uS with 1520uS center length, 50Hz to 333Hz - Input Voltage: 4.8V to 8.4V - Operating Temperature: -10 ℃ to 50 ℃ - Size: 43x27x14mm - Weight: 10g (excluding wires)

In conclusion, the new A3 Pro V2 is a highly capable and versatile 6-axis gyro and stabilizer that can enhance the flying experience of R/C airplanes of various sizes and types.

product information: